99在线精品国产不卡在线观看,亚洲制服丝袜 av,亚洲欧美卡通在线另类

<rt id="hmgnh"></rt>

<samp id="hmgnh"></samp>

聯系我們

18560023440

王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間

新聞資訊

五軸保麗龍雕刻機的主軸該如何選擇？

來源：http://m.840505.com 時間：2020-09-21

眾所周知，五軸保麗龍雕刻機一般都配備了高性能主軸來發揮其作用。主軸可用于高速雕刻，鉆孔和銑削，鉆孔等。當五軸保麗龍雕刻機的主軸高速旋轉時，會產生大量熱量。

As we all know, five axis styrofoam engraving machines are generally equipped with high-performance spindle to play its role. Spindle can be used for high speed engraving, drilling and milling, drilling, etc. When the spindle of five axis styrofoam engraving machine rotates at high speed, a lot of heat will be produced.

如果熱量沒有及時冷卻，會對主軸的使用壽命產生很大影響，甚會燒壞主軸。五軸保麗龍雕刻機的主軸有兩種主要的冷卻方法，包括水冷和空氣冷卻。但是主軸需要什么樣的冷卻方法？作為保麗龍雕刻機行業的行家，墨源提出以下建議。

If the heat is not cooled in time, it will have a great impact on the service life of the spindle, and even burn out the spindle. There are two main cooling methods for the main shaft of five axis styrofoam engraving machine, including water cooling and air cooling. But what kind of cooling method is needed for the spindle? As an expert in the styrofoam carving machine industry, Mo yuan puts forward the following suggestions.

五軸保麗龍雕刻機主軸的選擇

Selection of main shaft of five axis styrofoam engraving machine

使用水冷主軸或風冷主軸更好嗎？許多需要購買五軸保麗龍雕刻機的客戶將面臨這個問題。為了解決這個問題，墨源工程師列出了水冷主軸和雕刻機的空氣冷卻主軸之間的區別。也許選擇有幫助。

Is it better to use water-cooled spindle or air-cooled spindle? Many customers who need to buy a five axis styrofoam engraving machine will face this problem. To solve this problem, the ink source engineer listed the difference between the water-cooled spindle and the air-cooled spindle of engraving machine. Maybe the choice helps.

1.五軸保麗龍雕刻機的冷卻效果。水冷方法采用水循環冷卻主軸。水循環后主軸溫度保證在40度以下，其冷卻效果遠優于水冷方式。

1. Cooling effect of five axis styrofoam engraving machine. The main shaft is cooled by water circulation. After water circulation, the temperature of the main shaft is kept below 40 ℃, and its cooling effect is far better than that of water cooling.

2.五軸保麗龍雕刻機的噪音。水冷主軸電機基本上沒有噪音，與水冷相比，風冷主軸電機噪音較大。

2. Noise of five axis styrofoam engraving machine. The water-cooled spindle motor has no noise basically. Compared with water-cooled spindle motor, the noise of air-cooled spindle motor is larger.

3.五軸保麗龍雕刻機的使用壽命。水冷主軸可以通過人為因素延長使用壽命，如換水或使用工業水冷卻器，因此其使用壽命比風冷主軸長。

3. Service life of five axis styrofoam engraving machine. The service life of water-cooled spindle can be prolonged by human factors, such as changing water or using industrial water cooler, so its service life is longer than that of air-cooled spindle.

4.五軸保麗龍雕刻機的準確性。水冷主軸的軸向和徑向跳動基本上低于0.003 mm，其精度高于空冷主軸。

4. Accuracy of five axis styrofoam engraving machine. The axial and radial runout of the water-cooled spindle is basically less than 0.003 mm, and its accuracy is higher than that of the air-cooled spindle.

5.五軸保麗龍雕刻機易于使用。由于水冷卻主軸需要連接到水泵，因此需要一個水桶來保持水。它需要連接到水管。特別是在北方的寒冷冬季，水管容易結冰，這對于寒冷的冬天的顧客來說可能更麻煩。此時，風冷主軸更合適。

5. Five axis styrofoam engraving machine is easy to use. Since the water cooling spindle needs to be connected to the water pump, a bucket is needed to hold the water. It needs to be connected to a water pipe. Especially in the cold winter in the north, water pipes are easy to freeze, which may be more troublesome for customers in cold winter. At this time, the air-cooled spindle is more suitable.
相關標簽：五軸保麗龍雕刻機