五軸雕刻機正確的選型是關鍵詞

來源：http://m.840505.com 時間：2020-11-05 

五軸雕刻機的定位相比普通數控雕刻機要高出很多，在現如今這個魚龍混雜的年代，設備的選擇與否就更加重要。正確的選型是設備產生效益的關鍵。
The price positioning of five axis engraving machine is much higher than ordinary CNC engraving machine. In this age of mixed talents and talents, the choice of equipment is more important. correctThe selection of equipment is the key to benefit. In the purchase of five axis engraving machine,
在選購五軸雕刻機時，一定要了解清楚這五大注意事項：1、機床的鋼性_2、機床的精度3、控制系統_4、刀庫數量_5、請選擇五軸雕刻機廠家

we must understand the five major points for attention: 1, the rigidity of the machine tool_ 2. Accuracy of machine tools，A kind of 3. Control system_ 4. Number of magazine_ 5. Please choose five axis engraving machine manufacturer

一、五軸雕刻機的鋼性

1、 Rigidity of five axis engraving machine

由于五軸雕刻機的鋼性會直接影響到工作效率與機床的加工精確度，五軸雕刻機的加工效率是普通雕刻機是數倍，電機功

Because the rigidity of five axis engraving machine will directly affect the working efficiency and machining accuracy of the machine tool, the machining efficiency of the five axis engraving machine is several times higher than that of the ordinary engraving machine

率也大于同規格的普通雕刻機，因此五軸雕刻機的加床機構與設計使其外觀看上去緊湊結實，移動起來流暢靜音也因此它

The rate is also higher than that of ordinary engraving machines of the same specification. Therefore, the bed adding mechanism and design of the five axis engraving machine make it look compact and solid, and move smoothly and quietly

機床重量是普通機床的幾倍之多。

The weight of the machine tool is several times that of the ordinary machine tool.

二、五軸雕刻機的精度

2、 Accuracy of five axis engraving machine

定位精度，直接影響到你產品的質量，要注意加工精度與機床精度是完全不同的兩個概念，加工精度是包括機床本身所允

Positioning accuracy, directly affects the quality of your products, we should pay attention to the machining accuracy and machine tool accuracy is completely different from the two concepts, processing accuracy is allowed by the machine itself

許的公差范圍算在內在加上產品的整個加工工藝與各種因素所影響的公差范圍綜合這就是加工精度。而機床精度是合格證書

The allowable tolerance range is included, plus the whole processing technology of the product and the tolerance range affected by various factors, which is the machining accuracy. And the accuracy of machine tool is a certificate

上面標注機床本身的定位精度，所以購買時一定要充分的與設備生產商講清楚自己工藝要求、讓設備生產商提供的方案

The positioning accuracy of the machine tool itself is marked above, so when purchasing, it is necessary to fully explain the process requirements with the equipment manufacturer, so that the equipment manufacturer can provide professional solutions

提供給你查看并提出自己的所有疑問。

Provide it for you to view and ask all your questions.

三、控制系統如何選擇

3、 How to choose control system

控制系統是五軸雕刻機操作的核心算法，系統功能分為基本功能與選擇功能?；竟δ苁窍到y(tǒng)必備的，而選擇功能只有當

The control system is the core algorithm of five axis engraving machine operation. The system function is divided into basic function and selection function. The basic function is necessary for the system, while the selection function is only when

用戶選擇了這些功能后，廠商才會提供的。對于控制系統的功能一定要根據自己的工作需求來選擇，購買既要把需要的功能

After the user selects these functions, the manufacturer will provide them. The function of the control system must be selected according to their own work requirements, and the required functions should be purchased

訂全，不能遺漏，同時也要功能過剩高造成浪費，還需注意各功能之間的兼容性。

In addition, we should pay attention to the compatibility of various functions.

四、刀庫容量

4、 Magazine capacity

自動換刀裝置需要選擇自己的工藝需求與可用性盡量多出2-3把的容量同時也不能對刀庫容量的過多要求。并不是說刀庫容量

The automatic tool changer needs to choose its own process requirements and availability, and try to increase the capacity of 2-3 pieces, but also can not require too much tool magazine capacity. Not the magazine capacity

越多越好，一般刀庫容量過多換刀裝置結構復雜、故障率高、成本高，到了實際使用的時候卻發現大部分都是根本用不到的

The more the better, the general tool magazine capacity is too much, tool change device structure is complex, high failure rate, high cost, to the actual use, but found that most of them are not used at all

，所以過分強調刀庫容量會使費用提高并使故障率上升同時還造成了容量過剩。因此在滿足使用要求的前提下，盡量選用可靠

Therefore, overemphasizing the capacity of tool magazine will increase the cost and increase the failure rate, at the same time, it will cause excess capacity. Therefore, under the premise of meeting the use requirements, the reliable selection should be made as far as possible

性高的自動換刀裝置，以降低故障率和整機成本。自動換刀的工作質量和刀庫容量會直接影響加工的使用性能、質量。刀

Automatic tool changing device with high performance can reduce the failure rate and the cost of the whole machine. The working quality of automatic tool changing and the capacity of tool magazine will directly affect the performance and quality of machining center. knife

庫容量以滿足一個復雜加工零件對刀具的需要為基準。

The capacity of the library is based on the need of a complex machining part for cutting tools.

五：為甚要選擇五軸雕刻機廠家

5： Why choose five axis engraving machine manufacturer

選擇廠家購買：性價比更高，選配建議更，售后服務更完善，雕寶自動化設備有限公司是一家集研發、生產、銷售的高新

Choose manufacturers to buy: more cost-effective, more professional selection recommendations, more perfect after-sales service, Diaobao automation equipment Co., Ltd. is a collection of research and development, production, sales of high-tech

技術企業質量可靠、完善的售前、售中、售后服務，終身提供技術支持讓您售后無憂

Technology enterprises have reliable quality, perfect pre-sale, in-sales and after-sales services, providing technical support for life-long, so that you have no worries after sales

• 上一篇：使用石材雕刻機中散熱技巧
• 下一篇：如何提高四軸保麗龍雕刻機工作效率？

相關產品：
• 
  木工雕刻機
• 
  1325木工雕刻機獨...
• 
  1325木工雕刻機
• 
  1325木工鏤空花格...
• 
  1225型平雕圓雕一...

相關新聞：
• 
  激光雕刻機和機械雕刻...
• 
  三軸雕刻機無心外圓磨...
• 
  石材雕刻機斷刀的原...
• 
  數控開料機會受到什么...
• 
  泡沫雕刻機日常井蓋如...